Technical Specifications
SPRINKLER IRRIGATION SYSTEM PROJECTS
Lateral and Sprinkler Intervals
Sprinkling Pattern | Interval Sprinkler / Lateral |
---|---|
Triangle | 18/18 18/24 24/24 24/30 |
Square | 12/12 18/18 24/24 |
Rectangle | 12/18 18/24 |
Sprinkler Intervals at Variable Wind Speeds
Sprinkling Pattern | Wind Speed (m/sec.) |
Sprinkling Interval (m) |
|
---|---|---|---|
Squre or Rectangle | No-wind 2.0 3.5 3.5 |
0.65dd 0.60dd 0.50dd 0.30dd |
|
Triangle | No-wind 2.0 3.5 3.5 |
0.75dd 0.70dd 0.60dd 0.35dd |
SPRINKLER IRRIGATION SYSTEM PARTS
Water source and pump unit :A specific pressure is required for delivering water to the sprinklers.Required measures shall be taken while delivering irrigation water to the piping against substances which may block the system.
Main pipe :It delivers water to lateral pipes.It can be employed as an underground or aboveground system optionally.Suitable diameter shall be preferred according to the received water quantities.
Lateral pipe :They receive the water from main pipe and deliver it to the sprinklers.Their diameters are lower than the main pipe.
Fittings:Used for joining pipes and sprinklers.These parts shall ensure a flexible connection, prevent leakage at joints under pressure, shall ensure drainage automatically when pressure is releases, offer convenient connection and disconnection actions and be resistant to abrasion.
Sprinkler units :Sprinklers shall distribute the water to the field uniformly without causing surface flow or excessive drainage at the root section.Its performance impacts the entire system.